Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool Refrigerator  (Read 2314 times)

Offline North-East

  • VIP Member
  • Member Since: Feb 2012
  • Posts: 4
  • Country: ca
Whirlpool Refrigerator
« on: February 23, 2012, 07:20:58 PM »

In the last few months I have come across new 18 cu. ft. Whirlpool fridges, (Model number WRT138TFYW00), with cracked or split drain pans.   These pans are installed never to be replaced, or so it seems.   They are secured into the bottom of the fridge with four vertically installed 1/4" screws and even with these screws removed and the main rear frame dropped, the pan will not budge.   Does anyone have any ideas?
Appreciate any help...   Thanks. 


Offline whirlpooolcXc

  • VIP Member
  • Member Since: Jan 2010
  • Posts: 2
Re: Whirlpool Refrigerator
« Reply #1 on: April 03, 2012, 12:43:55 PM »
Hi North-East. I understand you need assistance with finding parts on your refrigerator.  We can help you by providing a link to the part list for your unit.  It is below: .

I hope this helps you. 

Social Media Representative

Offline PARTech

  • Technician
  • Member Since: May 2009
  • Posts: 415
  • Country: us
    • Buy me a beer through paypal
    • Panhandle Appliance LLC
Re: Whirlpool Refrigerator
« Reply #2 on: April 03, 2012, 01:26:34 PM »
Did they glue it to the bottom plate?  From all the views I can pull up the four screws you took out should allow it to come free.... 
Serving North Idaho