Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kitchenaid Range LR Burner Inoperative  (Read 4587 times)

Offline TechnicianBrian

  • Technician
  • Member Since: Dec 2007
  • Posts: 390
  • Country: us
    • TechnicianBrian.com
Kitchenaid Range LR Burner Inoperative
« on: April 17, 2008, 07:39:22 AM »

Model # KESC308LSS0, The customer turned on the left rear burner, heard a pop and then the unit went dead. After resetting the circuit breaker, the unit would function, but the LR burner was completely inoperative. After gaining access to the control panel, I found what appears to be a terminal connector that had worked it's way loose and contacted an exposed screw under the panel shorting 110vac to the chassis. This resulted in the contacts of the switch to be burned and no longer functioned properly. I repaired the connector and replaced the infinite switch with a new one, and now the burner works again.



Range Burner Infinite Switch Part # 9751364

[attachment auto deleted after 5 years by admin]
« Last Edit: April 17, 2008, 07:40:01 AM by AJ »