Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: GE Spacemaker 1800 microwave JVM1850SH06  (Read 3938 times)

Offline zwingli

  • VIP Member
  • Member Since: Aug 2011
  • Posts: 34
GE Spacemaker 1800 microwave JVM1850SH06
« on: March 07, 2012, 07:14:02 PM »

I went to look at an over the range microwave today and could not get it off the wall. The homeowner had the installation manual and it showed the wire release to release it from the wall plate. However, it was not there. I could not locate any other way to release it and I could not find anything on the parts break down. Any ideas?

Model JVM1850SH06

Offline tgoods

  • Technician
  • Member Since: Jul 2010
  • Posts: 1910
  • Country: us
    • Buy me a beer through paypal
Re: GE Spacemaker 1800 microwave JVM1850SH06
« Reply #1 on: March 07, 2012, 07:39:47 PM »
If there's a release lever, it should be behind the left grease filter.  Some microwaves are attached to the upper cabinet with three screws.  I've seen where cabinet installers have covered up the third screw when hiding the vent.

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1269
Re: GE Spacemaker 1800 microwave JVM1850SH06
« Reply #2 on: March 07, 2012, 10:27:49 PM »
I don't think this unit has a release. Should just be two screws in the top. That said I have really ran into some interesting mounts in the last month.