Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: 30 yr +Old KitchenAid Trash Compactor-KCS100 Need Parts!  (Read 4276 times)

Offline bappliance

  • Technician
  • Member Since: Feb 2012
  • Posts: 14
  • Country: us
  • The only true wisdom is in knowing you know nothin
30 yr +Old KitchenAid Trash Compactor-KCS100 Need Parts!
« on: March 05, 2012, 08:53:45 AM »

Does anybody know where I can find some parts for this old beast? Customer wants me to try to recondition it! I tried all the normal on line sites! But no luck!

Parts Needed

1-belt #c-118900
3-Retainer & mold stop Assem(Flat Ram Stops)#c-110993


Model # KCS100



Thx

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 956
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: 30 yr +Old KitchenAid Trash Compactor-KCS100 Need Parts!
« Reply #1 on: March 05, 2012, 09:28:02 AM »
I'm sorry these parts for no longer available

Sent from my MB865 using Tapatalk

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1831
  • Country: us
    • Buy me a beer through paypal
Re: 30 yr +Old KitchenAid Trash Compactor-KCS100 Need Parts!
« Reply #2 on: March 05, 2012, 10:05:37 AM »
I'm getting C-110900 for the belt which subs to 4161013 and is still available at many places online.  I believe the C-110993 subs to 4162026.  Does it look like this? I'm not having any luck finding it.  Maybe you can fabricate it out of a piece of teflon?

« Last Edit: March 05, 2012, 10:10:05 AM by tgoods »

Offline bappliance

  • Technician
  • Member Since: Feb 2012
  • Posts: 14
  • Country: us
  • The only true wisdom is in knowing you know nothin
Re: 30 yr +Old KitchenAid Trash Compactor-KCS100 Need Parts!
« Reply #3 on: March 05, 2012, 12:13:33 PM »
Tgoods ,thanks for your help! Thats the part I can't find (lower ,Stop Ram)C-110993 subs to 4162026.I'll do a little fabrication work!

thxs again!