Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: How to remove the front panel on my Maytag Neptune Washer?  (Read 12519 times)

Offline WDW

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 1
How to remove the front panel on my Maytag Neptune Washer?
« on: April 15, 2008, 10:03:37 AM »

Hello, I'm hoping someone can help me.  My washer is making a rattling sound while spinning.  It sounds like there is just something loose.  I need to remove the front panel but can't figure out how to do this.  I've done a little bit of research and the advice I've found doesn't work on this model.  Any help would be appreciated!

Model MAH8700AWW

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: How to remove the front panel on my Maytag Neptune Washer?
« Reply #1 on: April 15, 2008, 10:17:26 AM »
This is a Samsung made machine and I have a repair manual which covers the machine, even though it does not say Neptune on the manual. The rattling issue was common on these machines. Maytag says to secure the door wiring harness against the front panel if possible to eliminate rattling. The wiring cable and slap the sides of the cabinet if it is loose.

Click here for the manual
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com