Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: oasis kenmore dryer 110.7732600  (Read 4132 times)

Offline pallanesfour

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 166
  • Country: us
oasis kenmore dryer 110.7732600
« on: January 25, 2012, 09:23:04 PM »

ive replaced the Thermo cut off and the high limit three weeks ago and it blew the cut off again i checked for vent obstruction all is clear about a year ago we replaced both and now we replaced them again about three weeks ago and the cut off blew what can it be :D

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: oasis kenmore dryer 110.7732600
« Reply #1 on: January 25, 2012, 09:59:54 PM »
... i checked for vent obstruction all is clear
check it again
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline Washaman

  • Technician
  • Member Since: Jul 2009
  • Posts: 525
  • Country: us
Re: oasis kenmore dryer 110.7732600
« Reply #2 on: January 25, 2012, 11:37:18 PM »
Heating element could be grounding out, staying on at all times causing it to blow.

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: oasis kenmore dryer 110.7732600
« Reply #3 on: January 26, 2012, 03:54:18 AM »
110.7732600
check that model number again
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline ScottyMo1

  • Technician
  • Member Since: Nov 2011
  • Posts: 204
Re: oasis kenmore dryer 110.7732600
« Reply #4 on: January 26, 2012, 05:51:24 AM »
Turn the unit to Air Only setting and see if you get Heat. If you do replace the board, the heat relay if stuck. Ran into this several times on this model. With the relay stuck, the element never cycles off, thus popping the high limit and/or themal fuse.

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 956
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: oasis kenmore dryer 110.7732600
« Reply #5 on: January 26, 2012, 08:24:07 AM »
i have the same problem with cust. so far, replaced heater , motor, & thermostats, including thermistor. cust. said still stops in cycle. vent also was cleaned out. i now have control on order.

Offline pallanesfour

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 166
  • Country: us
Re: oasis kenmore dryer 110.7732600
« Reply #6 on: January 26, 2012, 08:07:33 PM »
thank you guys so much but this is a gas dryer and i rechecked the vents but no dice ???

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10970
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: oasis kenmore dryer 110.7732600
« Reply #7 on: January 26, 2012, 08:10:52 PM »
thank you guys so much but this is a gas dryer and i rechecked the vents but no dice ???

The model number you posted is short one digit.
Please double check it and post the full model number so we can see what we are working with, thanks.