Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

« previous next »
Pages: [1]   Go Down

Author Topic: GE WASHER VWSR4160G1WW  (Read 3184 times)

Offline zwingli

  • VIP Member
  • Member Since: Aug 2011
  • Posts: 34
GE WASHER VWSR4160G1WW
« on: January 25, 2012, 12:18:52 PM »

I am working on a GE top load washer.I can't get the agitator out. After removing the cup for the fabric softener I see a plastic dome. All the videos and online help says there should be a bolt under it that I should remove and then the agitator will lift out. The plastic dome will not come out. It is like it's glued in. What am I missing?Thanks again.

Model VWSR4160G1WW


Logged

Offline LowSL2

  • Technician
  • Member Since: Dec 2011
  • Posts: 1243
  • Country: us
  • My cuss. A LOT.
    • Buy me a beer through paypal
Re: GE WASHER VWSR4160G1WW
« Reply #1 on: January 25, 2012, 01:01:19 PM »
It may not have a bolt. The agitator will come out if you yank on it real hard. I've used my belt before. Just slip it under the agitator, buckle it together and pull up. Just make sure your pants don't fall down. :))
Logged
LowSL2
18+ Years of Professional Appliance Repair Experience
Former $ears/a$e tech

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 956
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: GE WASHER VWSR4160G1WW
« Reply #2 on: January 25, 2012, 01:11:12 PM »
no bolts, just pull straight up on agitator.
Logged

Offline zwingli

  • VIP Member
  • Member Since: Aug 2011
  • Posts: 34
Re: GE WASHER VWSR4160G1WW
« Reply #3 on: January 25, 2012, 01:18:21 PM »
You guys are the best! Thanks for your help.
Logged
Pages: [1]   Go Up
« previous next »