Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: HE washing machines  (Read 1989 times)

Offline jimbo6679

  • VIP Member
  • Member Since: Jun 2010
  • Posts: 109
HE washing machines
« on: January 14, 2012, 12:27:26 PM »

I was looking at an old Whirlpool repair manual, which I found here on the forum.   It was dated in the '90s.   Under troubleshooting, I found "problem....damaged clothes"   solution...low water level, raise the level.


Seems like back when, they realized low water level was a problem.  Todays HE machines seem to have low water level as a FEATURE, and both from personal experience and reading on line sources, it seems that damage to clothing is a problem with the new machines.


I guess we have algore to thank for that???

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: HE washing machines
« Reply #1 on: January 14, 2012, 05:30:20 PM »
The new low water machines do not operate on the same principle as the old ones. The old ones would fill to the top with 45 gallons of water and agitate for 14 minutes. These new one only put in around 5 or 10 gallons and continuously circulate the water over the clothes.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair