Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Estate Range / Stove / Oven Fault Code  (Read 4489 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10929
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Estate Range / Stove / Oven Fault Code
« on: December 15, 2011, 11:47:15 AM »


 
 
Failure Code
Fault Code Description
Solution
F0
Board failure
Replace control board (also called ERC or clock).
F1
Board failure
Replace control board (also called ERC or clock).
F2
Oven temperature is too high
1. Look for welded relay contacts on bake or broil relays. If this happens, replace oven control (also called clock or ERC).
 2. For SELF CLEAN models: check door lock operation.
 3. Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective.
 
 Remember: Oven control (ERC) measures resistance of sensor circuit, not actual oven temperature.
F3
Oven temperature sensor (RTD) open
Replace Oven temperature sensor (RTD)
F4
Oven temperature sensor (RTD) shorted
Replace Oven temperature sensor (RTD)
F5
Board failure
Replace control board (also called ERC or clock).
F7
Function key stuck on ERC
Replace control board (also called ERC or clock).
F8
Board failure
Replace control board (also called ERC or clock).
F9
Oven door lock failure
Check wiring to door lock switch (the wire harness may be connected wrong). Check for stuck lock switch.
 

Find Parts
Fault Code Index