Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: GE Range Oven F2 Fault Code During Self Clean  (Read 4227 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10967
  • Country: us
    • ApplianceJunk.com - Appliance Repair
GE Range Oven F2 Fault Code During Self Clean
« on: December 13, 2011, 09:01:01 AM »

Fault Code Description: Control senses oven temperature above 915F-930F

If actual over temperature condition occurred: Look for welded relay contacts. If this happens, replace oven control (also called clock or ERC).

If no over temperature condition occurred: Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective. Check door lock switches.

Remember: Oven control (ERC) measures resistance of sensor circuit , not actual oven temperature.

More Fault Code Information