Author Topic: Maytag washer MAV5920eww (Read 3420 times)

zwingli · « **on:** December 03, 2011, 03:40:42 PM »

I have a Maytag washer that continues to agitate when it is spinning. As a result, it doesn't spin the water out very well. I have been told the transmission is bad or that the cog that shifts from spin to agitate needs to be replaced. Any ideas?
Does anyone have a service manual for this?

Model MAV5920eww

Thanks.

whirlpooltech · « **Reply #1 on:** December 03, 2011, 07:35:09 PM »

When I search for your model number this is the service manual I come up with.
http://appliancejunk.com/forums/index.php?action=downloads;sa=view;down=104

Sounds like a transmission problem to me, wonder what the other technicians think about it.

tgoods · « **Reply #2 on:** December 03, 2011, 07:39:57 PM »

Yep, that's a bad transmission. The part, 35-6615, is expensive and you need a spanner wrench, 35-2968, and brake tool, 12002012, to install. Those tools are no longer available from Whirlpool. Might be time for a new washer.

Part # 35-6615 Ht Transmission, AP4373431

AJ · « **Reply #3 on:** December 03, 2011, 08:51:12 PM »

Did not know them tool were no longer available from Whirlpool.
I have some used ones if anyone is interested, lol..

I agree with tgoods, might be time for a new washer.

JWWebster · « **Reply #4 on:** December 04, 2011, 10:24:32 AM »

I took some photos of how it all breaks down.

Maytag single belt washer demystified

Get Answers to your Appliance Repair Questions

ApplianceJunk.com

Appliance Repair Forum