Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: GE Profile cooktop ignition problem  (Read 5077 times)

Offline blwn31

  • VIP Member
  • Member Since: Nov 2008
  • Posts: 7
GE Profile cooktop ignition problem
« on: November 17, 2011, 11:57:18 AM »

Hey guys, been a while since I posted. Hope all are well.
Anyway, my GE Profile Gas Cooktop JGP962SEC2SS has one burner that will not start the ignitor. Last week when my wife went to cook something, the ignitors wouldn't shut off. So I had her unplug the cooktop. Now, we have one that won't start the ignitor. We have to turn one of the other burners to the light position to get the ignitor to fire, since they all fire if one is on (normal ops). Question is, have you all seen this, and is it an ignitor module issue or an individual control valve issue related to the said burner? Any help would be appreciated.

Keith

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: GE Profile cooktop ignition problem
« Reply #1 on: November 17, 2011, 02:28:26 PM »
If one will ignite then you can be sure the spark module is fine so you must have a bad spark switch.
http://www.youtube.com/watch?v=kuza1bBfd3U
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair