Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: How I fixed a Whirlpool LEQ9030PQ1 dryer that was not heating.  (Read 2711 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10926
  • Country: us
    • ApplianceJunk.com - Appliance Repair
How I fixed a Whirlpool LEQ9030PQ1 dryer that was not heating.
« on: November 11, 2011, 07:46:45 AM »

This Whirlpool LEQ9030PQ1 dryer would run, but not heat.


After checking the dryer to make sure it was getting the correct voltage I unplugged it and pulled it out from the wall so I could remove the back of the dryer.


After removing the back of the dryer I removed the wires from the heating element and checked the heating element with my ohm meter.


The heating element checked bad with my meter so I replaced the heating element with a new one, part # 279838