Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Frigidair Range Model# GSE3WZCB  (Read 3159 times)

Offline AdirondackBob

  • Technician
  • Member Since: Oct 2010
  • Posts: 89
  • Country: us
    • North Country Appliance Repair
Frigidair Range Model# GSE3WZCB
« on: October 07, 2011, 03:57:12 PM »

Frigidaire Electric Range Model# GSE3WZCB Serial# VF34105192. This range is giving an F1 code and beeping. The lady said she tried to do a self clean and after a few minutes it threw the F1. I measured the resistance of the temp probe at the plug on the control and it is 1086 ohms. I also measured the door lock switch and it has continuity. When the breaker is turned back on, no matter which button is pressed the clean light comes on. Press Bake, clean light comes on. Press Clear and Set Clock, the Clean light comes on. When the clean light comes on, the door Locks and then unlocks and then flashes F1 and Beeps. Replace Control Board? Thanks, Bob

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8809
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Frigidair Range Model# GSE3WZCB
« Reply #1 on: October 07, 2011, 04:55:57 PM »
Get the old control out and look for corrosion or other reason why it might have failed.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline AdirondackBob

  • Technician
  • Member Since: Oct 2010
  • Posts: 89
  • Country: us
    • North Country Appliance Repair
Re: Frigidair Range Model# GSE3WZCB
« Reply #2 on: October 07, 2011, 07:38:30 PM »
Thanks  JW, so ya think that the control has definitely failed?  I saw on the frigidaire that F1 was a failed control but didn't want to just blindly replace the control. Thanks

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8809
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Frigidair Range Model# GSE3WZCB
« Reply #3 on: October 07, 2011, 07:43:23 PM »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL