Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore - Whirlpool only fills part way  (Read 2202 times)

Offline Selby903

  • VIP Member
  • Member Since: Sep 2011
  • Posts: 1
Kenmore - Whirlpool only fills part way
« on: September 07, 2011, 07:11:01 PM »

Hello,

The washer was running for part of a cycle and would stop.  My husband replaced the timer switch.  Now it will only fill part way and then stops.  Is it the water inlet valve?  Could it be blocked or does it need replaced?  We have checked the lid switch and my husband thinks it is working fine.  Model 110.82781100
Please help!!!
Michele

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1262
Re: Kenmore - Whirlpool only fills part way
« Reply #1 on: September 07, 2011, 07:21:22 PM »
Could be your valve,check you hoses and screens first.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Kenmore - Whirlpool only fills part way
« Reply #2 on: September 07, 2011, 07:58:39 PM »
Water level switch
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair