Author Topic: Maytag timer motor turns dial doesn't move (Read 5643 times)

Lonewolf · « **on:** August 08, 2011, 03:22:11 PM »

I just had a relative give me the dryer. The timer motor turns (can see it spinning) but dial doesn't move in timed dry or sensor dry. Cleaned the sensor bars inside dryer, no help. Can it be a mechanical connection between motor and dial damaged due to turning the timer the wrong way. Reason I ask is the relative showed me it didn't work but turned it to the left instead of right. Light doesn't light up on timer when in off position but does shutoff. $:-\$ . Door switch works also.

Thanks, any help is appreciated.

Model MED5740TQ0

jumptrout51 · « **Reply #1 on:** August 08, 2011, 03:52:40 PM »

REplace the timer. You have a bad timer motor.

AJ · « **Reply #2 on:** August 08, 2011, 04:10:16 PM »

Quote from: jumptrout51 on August 08, 2011, 03:52:40 PM

REplace the timer. You have a bad timer motor.

Yep, bad timer. I looked up your model number and the timer is part # 8566184

Lonewolf · « **Reply #3 on:** August 09, 2011, 02:09:17 PM »

Thanks so much for the reply! I'll order the timer today. RepairClinic.com "Out of Stock" so I'll try another source.

This place is great!!!!

AJ · « **Reply #4 on:** August 09, 2011, 02:15:19 PM »

By using the part number link I posted above to purchase your timer from AppliancePartsPros you help support this site.

Affiliate Disclosure

Lonewolf · « **Reply #5 on:** August 10, 2011, 03:39:48 PM »

I ordered the timer from appliancepartspros.com one day and had it the next. Fantastic service!!!

AJ · « **Reply #6 on:** August 10, 2011, 03:53:45 PM »

Get Answers to your Appliance Repair Questions

ApplianceJunk.com

Appliance Repair Forum