on this machine gets its temp input from a THERMISTOR
. If that thermistor is out of spec then the control will not know the temp inside the drum. My guess is the control cannot confirm temps and is shutting down because of it. You need to check the thermistor for open short or out of spec.
« Last Edit: July 06, 2011, 10:59:40 PM by JWWebster »
May the hinges of our friendship
never grow rusty.
About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair