Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Can this bearing be change?  (Read 2756 times)

Offline duketony75

  • Technician
  • Member Since: Jun 2011
  • Posts: 12
Can this bearing be change?
« on: July 06, 2011, 11:21:53 AM »

Kenmore stack unit made by frigidare. Model# 41798702891. There's a square block on the bottom of the transmission with a bearing in it. The whole block spins. Can that bearing be changed or do I have to replace it? If so what's the part #, I can't find it.


Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Can this bearing be change?
« Reply #1 on: July 06, 2011, 02:01:05 PM »
post a photo
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10983
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Can this bearing be change?
« Reply #2 on: July 06, 2011, 05:20:33 PM »
I looked up your model number and the bearing is part # 3204405.

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1902
  • Country: us
    • Buy me a beer through paypal
Re: Can this bearing be change?
« Reply #3 on: July 06, 2011, 11:54:57 PM »
The bearing in the block is not available separately.  You have to replace the whole transmission, 134735700.