Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool Dryer...  (Read 2963 times)

Offline tldean

  • VIP Member
  • Member Since: Jan 2011
  • Posts: 1
Whirlpool Dryer...
« on: January 09, 2011, 12:13:24 PM »

My old dryer went out, and replaced it with another Whirlpool, can i take the orifice from my old dryer and put it in the new one so i can use my LP Gas..

Model LGR4624DQ0

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Whirlpool Dryer...
« Reply #1 on: January 09, 2011, 01:05:45 PM »
I would go with the recommended kit for your new dryer.
Take a look at the Metering pin and stuff here in the LP Kit for your dryer
« Last Edit: January 09, 2011, 01:08:32 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Whirlpool Dryer...
« Reply #2 on: January 12, 2011, 06:37:30 AM »
what's your old Dryer model number ?
After leaving this Earth, "Do you want the smoking or non-smoking section?"