Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Gibson Heatpump  (Read 4431 times)

Offline jdman

  • VIP Member
  • Member Since: Jul 2007
  • Posts: 73
Gibson Heatpump
« on: November 30, 2010, 07:43:50 PM »

Gibson heatpump will run in cooling but not in heating. Have to switch to EM heat. Not getting 24V to contactor in heating mode. What to check?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Gibson Heatpump
« Reply #1 on: November 30, 2010, 08:49:29 PM »
That would have to be in the wall thermostat I would say. You getting 24 volts out there on the cooling side?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Gibson Heatpump
« Reply #2 on: December 01, 2010, 06:36:02 AM »
A heat pump sends power to the condenser on "Y" (yellow) wire in heat or cool.
Since your cool setting brings on the compressor your problem is in your thermostat.
Take a Kid fishing.