Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Maytag Quiet Series 200 stopped working  (Read 5705 times)

Offline RickiTikkiTavi

  • VIP Member
  • Member Since: Dec 2010
  • Posts: 2
Maytag Quiet Series 200 stopped working
« on: December 03, 2010, 06:06:17 PM »

Maytag Dishwasher about two years old stopped working.  Original symptoms were I could select various cycles of wash (Heavy, Normal, Light) but could no longer change options.  I.e. I could not turn off sanitize, or turn on heated dry.  What ever was set was stuck.
New symptoms are that now I can still select the various cycles of wash, but no other lights light up (i.e. the sanitize which was always on for light wash is not lit).  In addition I can no longer start the wash.  If I select light wash and press start the washer just times out and all lights go dark after a few minutes.

I figure it is either the touch panel or the circuit board, but do not know which one.  Can anyone help me so I can select the right part to replace?

Model MDB4651AWS

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag Quiet Series 200 stopped working
« Reply #1 on: December 03, 2010, 06:26:57 PM »
Stuck button maybe?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair

Offline PARTech

  • Technician
  • Member Since: May 2009
  • Posts: 415
  • Country: us
    • Buy me a beer through paypal
    • Panhandle Appliance LLC
Re: Maytag Quiet Series 200 stopped working
« Reply #2 on: December 03, 2010, 06:54:22 PM »
Touch panel, one side went and then the other, plus I've seen it before....
Serving North Idaho

Offline RickiTikkiTavi

  • VIP Member
  • Member Since: Dec 2010
  • Posts: 2
Re: Maytag Quiet Series 200 stopped working
« Reply #3 on: December 09, 2010, 03:24:35 PM »
Ordered replacement touch panel, part # 6-919806
Got it today.  Replaced it and this fixed the problem. 
Dishwasher is now working 100%.  Thanks PARTech. 
Appreciate the expertise on fixing this.

Offline PARTech

  • Technician
  • Member Since: May 2009
  • Posts: 415
  • Country: us
    • Buy me a beer through paypal
    • Panhandle Appliance LLC
Re: Maytag Quiet Series 200 stopped working
« Reply #4 on: December 09, 2010, 03:33:16 PM »
Glad to hear you are now up and running!! You are more than welcome!! O0
Serving North Idaho