Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore Agitator Help  (Read 3104 times)

Offline texriley

  • VIP Member
  • Member Since: Sep 2010
  • Posts: 6
Kenmore Agitator Help
« on: December 07, 2010, 05:58:23 PM »

I'm trying to fix the agitator on this kenmore 90 series washer. When I took the lid off the agitator I did not see the usual bolt in the middle. I'm not sure how to remove it...........Thanks Guys

Model 110.26932691

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Kenmore Agitator Help
« Reply #1 on: December 07, 2010, 09:01:13 PM »

Note: On the latest models is a square hole that 3/4 rachet drive fits into. You unscrew that and then you can easily remove the top portion and then you can see the lower bolt as per usual.
« Last Edit: December 07, 2010, 09:10:09 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair