Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore/Whirlpool Thin Twin Washer  (Read 5280 times)

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 628
  • Country: us
Kenmore/Whirlpool Thin Twin Washer
« on: October 20, 2010, 11:03:03 PM »

I blew out the water level pressure hose a couple months ago because of overfilling. Problem solved. I got a call back today with the same problem. Is it a coincidence that the tube is plugged again or should I focus on the water level switch. I could feel the crap blow out of the tube the first time.                                                                                                                                                                                                                                                                           Never mind. I ordered a water level switch just in case. I suppose the outer tub could be extra scummy so I'll run some washer cleaner through it. This thing is very well built into the closet so it's a last resort to take the cover off.

Model 110.88752791
« Last Edit: October 20, 2010, 11:14:10 PM by MajorApp »

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Kenmore/Whirlpool Thin Twin Washer
« Reply #1 on: October 21, 2010, 06:50:57 AM »
The other probability is a water valve sticking open on occasion.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 628
  • Country: us
Re: Kenmore/Whirlpool Thin Twin Washer
« Reply #2 on: October 21, 2010, 09:47:09 PM »
Thanks, I'll keep that in mind when I head in that direction monday.                             
BREAKING NEWS: evidently the washer is not overflowing but filling too high and splashing over the tub in all water levels. I'll be checkin it out monday.