Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore 70 Series Washer  (Read 3873 times)

Offline Scott7m

  • VIP Member
  • Member Since: May 2010
  • Posts: 5
Kenmore 70 Series Washer
« on: June 22, 2010, 11:49:28 AM »

This washer does everything right, until it gets to the spin cycle and begins to slow down. Or if its on the spin cycle and you start to raise the lid it will shake like crazy.  I'm not talking about a lil vibration, i'm talkin the walls are coming down.  Also, once I got it stopped i reached in and spun the tub manually and as it spins there is one spot that it gets to it will pop realllllly loud.  

Whats the thoughts on this?

Kenmore 70 Series

Type. 111
Mod.  110.26752500
SER: CS3929423


Offline Scott7m

  • VIP Member
  • Member Since: May 2010
  • Posts: 5
Re: Kenmore 70 Series Washer
« Reply #1 on: June 23, 2010, 05:09:34 PM »
anyone have any ideas

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Kenmore 70 Series Washer
« Reply #2 on: June 23, 2010, 05:11:52 PM »
Replace the brake/basket drive assembly which sits between the tub and transmission. If the ears of the drive block under the agitator are worn, it should be replaced as well.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com