When disconnecting the wires would create a flame ONLY worked on the initial/first flame. After the initial flame cycle, the wire disconnect would not work the next time the ignitor glowed, this time, the ignitor stays on as long as the wires are connected, when I disconnect no flame.
Now what coil are you talking about?? I felt all three on the gas valve and they do not seem hot. (they all look the same). I let the unit cool down and let the unit light, as soon as the flame went out, I felt all three coils and they felt cool.
Also, this is a stack dryer set (top & Bottom unit), I have the exact same problem on both units. But they both did not fail at the same time, but within days of each other.
Thanks for your help!