Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore Heavy Duty 70  (Read 2972 times)

Offline Codyray

  • VIP Member
  • Member Since: Jan 2010
  • Posts: 1
Kenmore Heavy Duty 70
« on: January 25, 2010, 04:17:12 PM »

Stops in mid cycle
Will spin all water out but timer sticks( doesn't advance automatically) when time to add water for rinse. If I rotate a bit and it will refill and do 2nd spin normally. Is it a bad timer?

Model 110.82873120

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Kenmore Heavy Duty 70
« Reply #1 on: January 25, 2010, 05:26:36 PM »
I think it is. You could try oiling the timer but it will probably need to be replaced. To get the timer off you need to remove the knob and skirt to get to the hex head screws. You flip up the controls and the timer has a quick connect.
« Last Edit: January 25, 2010, 05:28:19 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair