Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore Elite washer  (Read 2990 times)

Offline djajc35

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 7
Kenmore Elite washer
« on: January 25, 2010, 07:42:31 AM »

Our 7 year old washer will fill for about 20 seconds then stop. Nothing else happens, the lights stay on. It does this in all settings.   I took off both fill hoses and checked the screens and hose flow. They are fine. I now have several inches of water in the tub from testing. Any  ideas?

Model 110.2206

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Kenmore Elite washer
« Reply #1 on: January 25, 2010, 11:07:14 AM »
That model number is incomplete the entire number will be on a tag at the 12 oclock position of the tub under the lid
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair