Well you really need to take the drum out anyway so you can clean out the lint buildup and oil the rollers. Inspect the glides and idler and so forth. To access the machine is fairly easy. You first remove the power source. Then use a putty knife to pop the top. The door switch will come on off when you remove the front. Then you can get the drum out. This shows old type and new type machines:Some repair photosBelt Config
« Last Edit: December 29, 2009, 03:07:53 PM by JWWebster »
May the hinges of our friendship
never grow rusty.
About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair