Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: GE Stove Concept II Designer Series -DOOR Error  (Read 5374 times)

Offline mcnay55

  • VIP Member
  • Member Since: Jan 2010
  • Posts: 1
GE Stove Concept II Designer Series -DOOR Error
« on: January 31, 2010, 09:00:08 PM »

Help ! I need some assistance.

I have a white 30" GE stove self clean w/ convection (Concept II Designer Series) approximately 7 years old. (model #CRCL3640ZWW-1)

There is this annoying error message: DOOR.
This is displayed while the oven is operating and then it stops the oven cooking process. This can happen at any time but is mostly intermittent.
-In addition, if you were to run the self clean, there is a potential for the DOOR error as well.

I find if I jigger the sliding latch handle side ways and slap the door a few times, she comes back.

I would like to disable what ever it is that is preventing the DOOR error -- by pass a switch. Not sure where to start. Any thoughts ?

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: GE Stove Concept II Designer Series -DOOR Error
« Reply #1 on: February 01, 2010, 02:31:41 PM »
GE had a crummy door latch mechanism there for a bit. You just need to use the Canadian parts lookup and get you a new latch assembly to correct your problem.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman