Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: need thermostat recomendation  (Read 4050 times)

Offline madbchron

  • VIP Member
  • Member Since: Jan 2008
  • Posts: 14
need thermostat recomendation
« on: December 03, 2009, 10:36:57 AM »

I have a 3 ton carrier heat pump the control panel and programable thermostats are honeywell  twin thermostats for two zone dampers
iwant to replace this control system, I have a white rodgers cmm-3 comfort zone control panel i need 2 non programable didital stats that would workand have the capability to activate the emergency heat strip when necessary  i found a rite-temp 6020 but it is not automatic you have to manualy  jumper out the heat pump to energize the heat strips
do you have a recomendation and a selection of stats in your inventory
thanks madbchron

Offline Icehouse

  • Technician
  • Member Since: Oct 2008
  • Posts: 569
    • hvacbob
Re: need thermostat recomendation
« Reply #1 on: December 14, 2009, 01:29:17 PM »
You need the proper sub-base. The switching action takes place there.
NATE, NCCER, PHCC,HVAC Certified Instructor
Member RSES, US Army Refrigeration Specialist(Retired), Former Refrigeration Teacher NYC Board of Ed.
a tragedy has happen to me : http://web.me.com/zenzoidman/Bobice/