Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore Washer does not change cycles on its own  (Read 3842 times)

Offline Frankie

  • VIP Member
  • Member Since: Oct 2009
  • Posts: 1
Kenmore Washer does not change cycles on its own
« on: October 20, 2009, 06:38:21 PM »

My Kenmore can function in each cycle if I change the dial manually, but it has stopped progressing through the cycles on its own. The dial also does not move. Would the problem simply be the dial or the timer? If it is one of those what does it look like in the console and do I remove the entire block unit and how do I remove it?

Model 110.20882990

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Kenmore Washer does not change cycles on its own
« Reply #1 on: October 21, 2009, 06:09:15 PM »
Replace the timer. It is the one with the control knob(dial) attached.
Take a Kid fishing.

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Kenmore Washer does not change cycles on its own
« Reply #2 on: October 21, 2009, 08:57:02 PM »
That's correct. Replace the timer.

I looked up your model number and the factory part number for your timer is 3953248.
AppliancePartsPros.com - Over 2 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!