TO: AJ, Whirlpool Tech, et al:
It's with a somewhat reddened face that I must say please disregard my previous post. For some reason I didn't thoroughly check the wire connection. I only looked & pulled on the wire nuts to see if the wires were loose (they weren't). Earlier tonight (just after the post) I hit the floor & took the wire nuts completely off and retightend them. I then tripped the breaker & flipped the on/off switch to "on", and ....... the d/w took off & completed the cycle!
So, to you guys - sorry I didn't completely follow your directions earlier. Glad I did now. Many thanx, guys! Appreciate your help & I'm going to spread the word for y'all (both by word of mouth and online).
Thanx for your service! Take good care & God Bless!
