Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool electronic error code  (Read 9040 times)

Offline roxgirl

  • VIP Member
  • Member Since: Jul 2007
  • Posts: 1
Whirlpool electronic error code
« on: July 25, 2007, 07:51:09 PM »

Hi...I have a Whirlpool Catalyst washing machine, about 5 years old (p/n 110.22052100).  It has started flashing the F4 code once and then it will flash the F3 code.  I tried getting a repair manual from Sears, but the one they sent me doesn't even have an electronic panel, so no error codes.  It is intermittent and usually if I wait a day, it will run fine.  Does anyone know what these error codes are?  Or maybe where I can buy a manual that will tell me?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10926
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Whirlpool electronic error code
« Reply #1 on: July 25, 2007, 08:15:36 PM »
Hi roxgirl

Quote
Does anyone know what these error codes are?

F3 is Lid Switch Failure and I could not find a F4 in the book.

Quote
where I can buy a manual that will tell me?

Here is the manual.

http://www.appliancejunk.com/manuals/catalyst.pdf

Page 27 is were I found the F3 error code listed.

Sometimes you can find a tech sheet folded up inside the control panel. They may have more error codes listed there.



« Last Edit: September 09, 2007, 05:49:54 PM by AJ »