Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Magic chef washer  (Read 2789 times)

Offline diyguy

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 17
Magic chef washer
« on: June 25, 2009, 06:26:57 PM »

Okay here's the deal, no cold water period....the cold water is on because the hose was disconnected to make sure there is water coming through, and the screen was not clogged up, but when you select cold/ cold you get nothing, when I select hot/cold or warm/cold it will fill but still no cold for rinse.  Any guesses, inlet valve, temp selcetor switch?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Magic chef washer
« Reply #1 on: June 25, 2009, 07:13:33 PM »
Since it is like all other washers and relies on cold water in the rinse cycle to keep the wrinkle demons away, I would venture to take a wild guess and say replace the water valve.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair