Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore Dryer not dying cloths all the way  (Read 3087 times)

Offline Lynchmob

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 1
Kenmore Dryer not dying cloths all the way
« on: June 17, 2009, 11:48:45 AM »

My dryer does not dry the clothing all the way.  Spin cycle in washer seems good.  Changes the Temp sensor on exhaust air, changed High Stat sensor.  Heating element ohms out at 10.4 ohms. Will check the air temp tonight.  Could it be my timer running too fast?  or the resistor connected to the auto dry setting.

Model C110-8450290

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Kenmore Dryer not dying cloths all the way
« Reply #1 on: June 17, 2009, 02:17:12 PM »
Remove the exhaust vent from the rear and run a timed load at 45 minutes. If it dries OK clear your vent/lint obstruction.
Take a Kid fishing.

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Kenmore Dryer not dying cloths all the way
« Reply #2 on: June 17, 2009, 02:45:09 PM »
Not sure if this is a gas or electric dryer, but for safety you do not want to run a gas dryer without a vent connected to the dryer.
AppliancePartsPros.com - Over 2 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!