The washer will fill up with water and then shut off.
This is a older style Maytag washer. One of the good old dependable drive machines.
I know that these washers will not agitate or spin with the lid open. So I opened and closed the washer lid to listen for the clicking sound of a working switch.
I could hear the switch clicking on and off. At first I thought the switch was ok, but then I remembered that this style maytag has two switches in the lid switch assembly.
So I removed the two screws on top the washer above the timer and took a look behind the control panel. I could see that the plunger on one of the switches was broken.
I replaced the lid switch assembly and tested the washer again. This time the washer would agitate and spin just fine.