Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Thin Twin Tub tilts toward the back of the unit  (Read 3906 times)

Offline Jaytag

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 143
Thin Twin Tub tilts toward the back of the unit
« on: May 12, 2009, 08:30:12 PM »

The wash basket tilts to the back of the unit.  The unit is level.  I have looked underneath, there are two styrofoam blocks that appear to be loose aka lying around the bottom.  Would they play a role in keeping the tub level?  The washer works fine but it bothers me that it tilts.

Model Number: LTE5243DQ0 icon

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Thin Twin Tub tilts toward the back of the unit
« Reply #1 on: May 12, 2009, 11:02:06 PM »
Your skinny mini has a set of 3 springs on the bottom that hold it straight. Those dudes ain't too good of a design. Part # AP4358664 Go here and typpe in that part number.
« Last Edit: May 12, 2009, 11:05:09 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair