Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool 2 speed 8 cycle wasting water  (Read 2231 times)

Offline Hapsie

  • VIP Member
  • Member Since: Apr 2009
  • Posts: 1
Whirlpool 2 speed 8 cycle wasting water
« on: April 29, 2009, 03:06:54 AM »

When I start my cycle on the toploader water goes straight from intake directly to the drain pipe instead of staying inside the drum , please advise

Model 3LA58000XS

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Whirlpool 2 speed 8 cycle wasting water
« Reply #1 on: April 29, 2009, 05:31:22 AM »
The drain pipe must be 38" from the ground and not sealed off. If you hang it any lower siphoning will occur. Siphon-break kits are available to prevent this if you are unable to adjust your hose configuration.
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com