Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kitchenaid stand mixer  (Read 3965 times)

Offline lcsw

  • VIP Member
  • Member Since: Jan 2008
  • Posts: 3
Kitchenaid stand mixer
« on: April 06, 2009, 07:42:50 AM »


I have a Kitchenaid stand mixer, which I thought was supposed to be a pretty good brand.  It didn't last too long, though.  I'm guessing the problem is the switch because it only runs on high speed.  Nothing happens until the switch gets to the highest setting.

Any ideas on whether it is salvageable?


Offline Al Capone

  • Administrator
  • VIP Member
  • Member Since: Feb 2008
  • Posts: 409
  • Country: us
Re: Kitchenaid stand mixer
« Reply #1 on: April 06, 2009, 08:16:43 AM »
Hi lcsw,

Could you post the model number for us?

Thanks, - Over 2 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!

Offline edlee

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 6
Re: Kitchenaid stand mixer
« Reply #2 on: April 07, 2009, 02:03:23 PM »
I'm not sure about yours, but on mine, the motor that turns the bowl,,,yeah, a separate one,, burned up after about a month of use.

After hours on the net, trying to find the replacement parts site for kitchenaid, I finally found it,, and the part number,, only to be informed that the part was obsolete.

By the way,,, the same mixer is still being sold. 

Some parts are available, but remember,, it's made in China, so the parts may be hard to get shipped correctly.

Good luck,