Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: How do you remove the front panel of the GE Profile Washer  (Read 8507 times)

Offline 88jrnascar

  • VIP Member
  • Member Since: Mar 2009
  • Posts: 2
How do you remove the front panel of the GE Profile Washer
« on: March 01, 2009, 11:31:40 AM »

Diagram to remove front panel to inspect belt/motor....any ideas where to look?

Model wpse4200

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: How do you remove the front panel of the GE Profile Washer
« Reply #1 on: March 01, 2009, 12:15:13 PM »
On this particular machine the top is bolted down to the frame so you must get the front panel off first before the top can come up. Use a putty knife to release the spring clips, tilt the front panel towards you, and lift it out yer way.
« Last Edit: March 01, 2009, 12:16:46 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair