Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: kenmore 80 washing machine  (Read 3554 times)

Offline Jim Moore

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 2
kenmore 80 washing machine
« on: February 22, 2009, 02:21:07 PM »

I need to replace the sensor-when you close the top it makes it spin-
but unable to lift the top up to replace the part.
need help
thanks,
JIm

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: washing machine
« Reply #1 on: February 22, 2009, 03:11:09 PM »
what you do is remove the case. The top don't pop up. Take a look at this excellent PDF produced by our fearless leader AJ:
http://appliancejunk.com/motorcoupler.pdf
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair

Offline Jim Moore

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 2
Re: washing machine
« Reply #2 on: February 22, 2009, 10:25:47 PM »
Many thanks for your help, for someone who knows nothing about washing machines, or anything about appliances, your directions were right on.
Thank again
Jim Moore