Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Bosch dishwasher, not completing cycle, E01 error, Customer Service program E32  (Read 964 times)

Offline gmd357

  • VIP Member
  • Member Since: Jun 2022
  • Posts: 1

Hello, I have a model SHX4AT55UC/14...at first, the DW was stopping just short of the final rinse cycle. Now it only runs about 25 mins. It give me the E01 error. I have replaced the control module but the condition is the same. I have run the customer service program and it throws an E32 error right away. Bosch customer service could not tell me what an E32 error was and its not in the manual.
Other than it not completing the full cycle, everything seems to be working fine. I can hear the water filling the tub, its doing the pre-rinse, its seems to be draining fine. After the half hour or so, once it stops, the water inside is hot. One thing I have noticed is the detergent door is still closed.

Any help would be greatly appreciated.