Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore washer more issues? NOiSES  (Read 113 times)

Offline ron3033

  • VIP Member
  • Member Since: Feb 2013
  • Posts: 114
  • Country: ca
Kenmore washer more issues? NOiSES
« on: April 26, 2022, 09:15:01 PM »

Hi
Sears Kenmore washer  110 2091 2991  series 90  type 111

I changed the broken motor coupler.  When it wash back together it made this sharp Click Click Click noise as it was in spin cycle.  Then it made a grind noise and does nothing now...new coupler is still good.

Is the transmission toast now?  Possibly this is what broke the coupler in first place?
I posted a 51 second video of the noises    Is this mean I need a new washer?

https://www.youtube.com/shorts/2ozNSefAWdM

thank you

Offline ron3033

  • VIP Member
  • Member Since: Feb 2013
  • Posts: 114
  • Country: ca
Re: Kenmore washer more issues? NOiSES
« Reply #1 on: April 27, 2022, 10:16:23 AM »
Hi here is a video of the noise..new motor couple installed,   coupler turns but basket does not spin, nor does the clutch part.

I can turn clutch with my thumb and fingers with effort it moves basket.  see 7 second video

https://www.youtube.com/shorts/BqYVVkEEWKE



this is previous video of click before it stopped

https://www.youtube.com/shorts/2ozNSefAWdM



Trying to figure if it is transmission gone.  Do not want to buy a transmission and it still not work.



Thanks

ron3033