Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Replaced Bellows and Door won't close.  (Read 427 times)

Offline Rar08

  • VIP Member
  • Member Since: Dec 2021
  • Posts: 1
Replaced Bellows and Door won't close.
« on: December 15, 2021, 08:06:00 AM »

Hi, I am new to this forum. I have a slightly older Fridgidaire Affinity ATF7000FS1 washer. It had a year in the Bellows. I replaced it with an OEM Bellows, installed it correctly and the Door won't close. I was baffled and ended up replacing the Door Hinge and Door locking mechanism and the Door will still not latch and close I removed the Bellows from the door panel and the door will close and lock. It seems to bind a little on the left side of the door when the Bellows is in place. Anyone have any ideas.

Offline luck

  • Technician
  • Member Since: Aug 2009
  • Posts: 65
Re: Replaced Bellows and Door won't close.
« Reply #1 on: December 16, 2021, 05:49:35 PM »
was it a frigidaire part