Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Icemaker Problem KitchenAid MD# KRFC704FBS00  (Read 128 times)

Offline wydross

  • VIP Member
  • Member Since: Sep 2021
  • Posts: 1
  • Country: us
Icemaker Problem KitchenAid MD# KRFC704FBS00
« on: September 14, 2021, 08:56:32 PM »

Hello Everyone ,

I am having an issue with the ice maker on a Kitchen Aid French door fridge MD# KRFC704FBS00

So here is what I have done so far.

1) Check fill tube for ice / obstruction. No issue found
2) Install new ice maker. - no change
3) Ran Diagnostic mode to check ice maker operation - The ice maker goes to step one of 4 and gets stuck in the dumping position.
4) Check for wiring damage near hinges .

I have not been able to find any additional information on this problem but could really use some help .

Thanks in advance for any advice or resources.

Offline 100 td

  • Technician
  • Member Since: Jul 2021
  • Posts: 70
Re: Icemaker Problem KitchenAid MD# KRFC704FBS00
« Reply #1 on: September 16, 2021, 05:17:16 AM »
Sorry I don't have time to go through this, this may or may not help or work
If it works or what you have works, go through a full set of tests. Check the bin level arm on the icemaker if it has one.
« Last Edit: September 16, 2021, 05:19:15 AM by 100 td »