Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool WFW9050XW03 error code  (Read 467 times)

Offline washmedaddy

  • VIP Member
  • Member Since: Aug 2021
  • Posts: 1
Whirlpool WFW9050XW03 error code
« on: August 12, 2021, 02:03:26 PM »

Trying to figure out what error I'm getting with this washer and Google has failed me so far. 

I'm getting 3 beeps, "wash" light flashing, and "door lock" light is red.  There is no display on this washer that flashes an error code (even though the manual for it says to look at the display). 

I have power cycled it multiple times.  It just goes right back to doing this after what sounds like water draining?  Eventually it will stop beeping, let the door open, but if you try to close it and start a cycle it goes back to this. 

Here is a quick video- https://www.youtube.com/watch?v=x2cyKUDngEM