Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: rf265beaesg/aa samsung  (Read 152 times)

Offline Rsing1

  • VIP Member
  • Member Since: Jun 2021
  • Posts: 2
rf265beaesg/aa samsung
« on: June 16, 2021, 03:01:24 PM »

I'm working on a Samsung refrigerator with the family hub, model rf265beaesg/aa. The home was struck by lightning and the refrigerator went out. The invertor board had a bad bridge and blown fuse, I replaced the board and powered it up and now it shows 44c communication error. I found that the main pcb is sending out 5v comp signal, the condenser fan activates, but no compressor. I am not sure if it is the main pcb or compressor at this point and would appreciate any help/suggestions. Thank you.

Offline Rsing1

  • VIP Member
  • Member Since: Jun 2021
  • Posts: 2
Re: rf265beaesg/aa samsung
« Reply #1 on: June 17, 2021, 09:06:43 AM »
The compressor is a model : MSV172AL2J/SM3. I got 12 ohms on the pins no matter which configuration. On the inverter board I noticed that the led comes on when plugged in but then turns off and remains off. Suggestions?