Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore 24 inch burner wires shorted and light staying on  (Read 496 times)

Offline ukeacreator

  • VIP Member
  • Member Since: Jun 2021
  • Posts: 1
Kenmore 24 inch burner wires shorted and light staying on
« on: June 07, 2021, 07:27:07 AM »

So i replace the burner on my stove and turned it on, then there was a pop sound. I took it apart and the wires going to that burner were chewed through or melted. I disconnected them for now , i tried to rewire them back up and im getting power to the plug but the burner is not getting hot and the light wont turn off. This is unusual for this model because it usually only turns the light on if the burner is on. Checked this morning and the light is still on but all the burners are off