Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Maytag washer top load model LAT8035AAM  (Read 381 times)

Offline Thorning

  • Technician
  • Member Since: Jun 2013
  • Posts: 986
Maytag washer top load model LAT8035AAM
« on: May 02, 2021, 09:00:52 AM »

The above model washer  was given to me with the caution that it might need some repair.    I dismantled the unit and found no problems in the drive area and no leaks or noise when running.  I did note one item that needs clarification in the internal parts.
Specifically the fabric dispenser on the top of the center shaft agitator has an open hole on the bottom.  The hole is about 3/8 " diameter. My question to other techs . Should this have a button in it or some other type of closure ? Any info would be appreciated.

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1704
  • Country: us
    • Buy me a beer through paypal
Re: Maytag washer top load model LAT8035AAM
« Reply #1 on: May 03, 2021, 10:02:30 PM »
It's missing the cup insert that sits inside the agitator.

Offline Dash

  • Technician
  • Member Since: Sep 2015
  • Posts: 137
Re: Maytag washer top load model LAT8035AAM
« Reply #2 on: May 23, 2021, 11:47:07 PM »
It's missing the fabric softener cup.