Today I finally drained the tub using a mini submersible pump. Disconnected everything, tilt back, and notice that the drain belt has jumped off, and the drive belt is pretty eaten up as well. Drain pulley had come off the shaft, when I pressed it back on and tried to spin, it didn't move. When I took it apart, found my kids sock stuck in the pump. After removal, the pump still doesn't spin too smoothly, so I think I'll just replace the pump, as well as the two belts and see how it goes. Hope that's somehow tied to the issue where the timer overruns "off", if it's not, I don't know how that could happen the same time as this snapped belt/pump issue (coincidence??) Thanks guys, I'll report back.